Supports Vanadium Oxide uncooled sensor to measure target's temperature
Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C without black body
Recognition distance 0.3 to 1.8 m
Fast temperature measurement mode: Detects face and takes body temperature without identity authentication
Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
Face mask wearing alert
If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time the authentication or attendance is valid.
Forced mask wearing alert If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time the authentication or attendance will be failed.
Displays temperature measurement results on the authentication page
Triggers voice prompt when detecting fever
Configurable door status (open/close) when detecting fever
Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
Face recognition ＜0.2 s/User; face recognition accuracy rate ≥ 99%
6,000 face capacity, 6,000 card capacity, and 50,000 event capacity
Suggested height for face recognition between 1.4 m and 1.9 m
Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
Watch dog design and tamper function
Audio prompt for authentication result
NTP, manually time synchronization and auto synchronization
Connects to external access controller or Wiegand card reader via Wiegand protocol
Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
Imports and export data to the device from the client software